Instructions / Assembly

13
13
13.
PLACING WATER PAN AND WATER PAN
SUPPORT ONTO THE BOTTOM AREA OF
CABINET AND PLACING COOKING GRIDS
INTO THE COOKING GRID SUPPORT
Parts Required:
3 x Cooking Grid (#4)
1 X Water pan Support (#13)
1 x Water Pan (#12)
Installation:
•Place Water Pan Support (#13) and Water
Pan (#12)onto the bottom area of Cabinet
and place three Cooking Grids(#4)into the
Cooking Grid Support as Fig.13.1 &
Fig.13.2 shown.
Fig.13.1
14.
MOUNTING LOGO PLATE TO THE
DOOR ASSEMBLY
Parts Required:
1 x Door Assembly (#8)
1 X Logo Plate (#26)
Installation:
Note: The Logo Plate is supplied with one
fiber washer and one wing nut.
Installation:
•Insert Logo Plate (#26) mounting thread pole
through the mounting hole in the front of the
Door Assembly(#8). From the inside of the
door, place fiber washer and wing nut onto
the mounting thread pole and tighten by hand
as Fig.14 shown.
15.
MOUNTING DOOR GREASE SHIELD
TO THE DOOR ASSEMBLY
Parts Required:
1 x Door Grease Shield (#25)
1 X Door Assembly (#8)
5 x #8-32 Self-tapping Screw(#F)
Installation:
• Attach the Door Grease Shield (#25) to
the Door Assembly (#8) using 5 x #8-32
Self-tapping Screw(#F) as Fig.15 shown.
Fig.15
Fig.14
Fig.13.2
#4
-
-
-
-
-
-
-
-
#12
-
-
--
-
--
-
#13
-
-
-
-
-
-
-
#26
-
-
-
--
--
--
--
#25
-
-
-
-
--
-
-
-
-
-
-
-
-
-