User Manual

Parts are located throughout the shipping carton, including inside the COMB grill with

electric smoker. Inspect the unit, parts, and hardware blister pack after removing from the protective

shipping carton. Before assembly of product, review all parts and reference the parts list. If any part is

missing or damaged, do not attempt to assemble. Shipping damage is not covered under warranty.

Contact your dealer or Pit Boss Customer Service for parts at 1-877-303-3134 .

IMPORTANT: To ease installation, using two people is helpful when assembling this unit.

Tools required for assembly: screwdriver and wrench. A wrench for the wheels is included.

IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not

tighten screws completely until all screws for that step have been installed, or unless otherwise

mentioned.

ASSEMBLY PREPARATION

ASSEMBLY INSTRUCTIONS

M4x10 bolt

1. MOUNTING THE LEFT FRONT

SUPPORT LEG TO LOWER

CABINET ASSEMBLY

Parts Required:

1 x Lower Cabinet Assembly(#46)

1 x Left Front Support Leg (#44)

2 x M6x60mm Screw (#C)

1 x M4x10mm Screw (#F)

Installation:

• Place a piece of cardboard on the

floor to prevent scratching the unit.

• Mount Left Front Support Leg (#44) to the

Lower Cabinet Assembly (#46)

Use: 2 x M6x60mm Screws (#C) &

1 x M4x10mm Screw (#F)

see Fig.1

Fig.1

#44

-----------