User Manual

27
48. MOUNTING THE LID HANDLES AND
LID HANDLE STANDOFFS TO BOTH
GAS AND CHARCOAL LIDS
Parts Required:
2 x Lid Handles (#6)
4 x Large Handle Standoffs (#7)
1 x Gas Lid
1 x Charcoal Lid
8 x M6x15mm screws (#A)
Installation:
•Attach 2pcs Lid Handles and 4pcs Large
Handle Standoffs to the Gas Lid and
Char-coal lid using 8x M6x15 screws (#A)
using 8x M6x15 screws
See Fig.48.1
Fig.48.1
Note: Slots on both side of Lid Handle
must be inserted into the embossed area
on inside area of Handle Stand-off
See Fig.48.2
49. MOUNTING THE WIRE HOSE
RETAINER TO LEFT FRONT LEG
Parts Required:
1 x Hose Wire Retainer
( pre-assembled on hose)
1 x Left Support Leg (#44)
1 x M6x10mm screw (#D)
Installation:
•Attach Hose Wire Retainer to the Left
(Front) Support Leg (#44)
Use: 1 x M6x10 screw
See Fig.49
Fig.48.2
Fig.51
Fig.49
51. Assembly of the Memphis Ultimate
Grill is completed
#7.1(L) --------
#7.2(R) ------
Hose
Retainer
---------
• It is highly recommended to wipe the
exterior of your unit clean of debris, dirt,
etc., using warm soapy water and a soft
cloth.
• Remove all advertising and any glue
residue.
• Use a vinegar and water solution to clean
the glass on the smoker. Do not use a
glass cleaner as this will leave a film on
the glass, which could bake on.
50. Install Battery into LP Gas Sparker
Parts Required:
1 x AA Battery
Installation: Unscrew (counter clock wise)
sparker button from front panel. Insert
AA battery with the "+" end facing out as
per Fig.50.
Fig.50
+
_