User Manual

25
42. PLACING CHARCOAL TRAY ON THE
LIFTING SYSTEM
Parts Required:
1 X Charcoal Tray (#11)
Installation:
• Place the Charcoal Tray (#11) onto the
Charcoal Tray Lifting System
See Fig.39
Fig.42
43. MOUNTING THE SMOKE STACK TO
THE CHARCOAL LID
Parts Required:
1 X Smoke Stack (#4)
1 X Smoke Stack Lid (#3)
1 x Charcoal Lid
2 x M6 x 10mm Screws (#D)
2 x M6 Nuts (#J)
Installation:
Insert Smoke Stack (#4) through the
Charcoal Lid from the inside. Attach the
Smoke Stack Assembly to the Lid using 2 x
M6x10 screws (#D) inserted through the
Lid from the outside, fasten the Smoke
Stack using 2 x M6 nuts (#J) securely
inside the Lid. Screw Smoke Stack Lid onto
Smoke
Stack
See
Fig.43
44. ATTACHING THE WARMING
RACK
TO
THE GA
S LID
AND MAIN CHAM
BER
Parts Required:
1 x Warming Rack (#5)
1 x Gas Lid
1 x Gas Main Chamber
2 x M6x3
0mm screw (#M)
Installation:
•Screw 1x M6x30 screw (#M) through the
Gas Lid from the outside, position 1pc
Warming Rack to the gas grill so that the
screw is going through the wire loop
See Fig 44.1 & Fig.44.2
• Then align the wire loop on the opposite
end of the Warming Rack with the
opposite Lid hole and insert 1x M6x30
screw (#M). Insert the wire legs into
the holes of the Gas Main Chamber
See Fig. 44.3
Fig.43
Fig.44.1
Fig.44 Fig.44.2 Fig.44.3
------ Correct direction