User Manual

21
Fig.31
Fig.32
31. MOUNTING THE RIGHT SIDE TABLE
TO RIGHT SIDE OF MAIN CHAMBER
Parts Required:
1 x Right Side Table (#10)
1 x Main Chamber
4 x M6x15mm screws (#A)
Installation:
•Attach 4x M6x15 screws onto right side
of Main Chamber and leave about 1/4”
out.
•Again hang the Right Side Table (#10)
onto those four screws and then push
down to seat on it, then tighten 4x M6x15
screws (#A) securely.
•See Fig.31
32. MOUNTING THE MATCH LIGHTER
AND CHAIN TO LEFT SIDE OF
CONTROL PANEL
Parts Required:
1 x Match Lighter and Chain
(#53) 1 x Control Panel
1 x M6x15mm Shoulder Bolt (#I)
Installation:
•Attach Match Lighter and Chain (#53) to
the left side of Control Panel.
•Use: 1 x M6x15 Shoulder Bolt (#I)
See Fig.32
33. MOUNTING THE COOKING GRID
BACK SUPPORTS TO THE BACK
PANEL OF GAS AND CHARCOAL MAIN
CHAMBER
Parts Required:
2 x Cooking Grid Back Supports (#21)
1 x Main Chamber
8 x M4x10mm screws (#F)
Installation:
•Attach Cooking Grid Back Support (#21) to
the back panel of Charcoal Main Chamber
Use: 4 x M4x10 screws (#F)
See Fig.33
• Repeat the same step on Gas Main
Chamber.
Fig.33
#21
-----------