User Manual

28. MOUNTING THE GREASE SHIELDS
INTO THE MAIN CHAMBER
Parts Required:
4 x Grease Shields (#23)
1 x Main Chamber
6 x M6x10mm screws (#D)
6 x M6 Nuts (#J)
Installation:
•Mount Grease Shield (#23) to the Main
Chamber using 2 x M6x10 screws (#D) and
2 x M6 Nuts (#J)
Re-peat the same step for the other 3
Grease Shields (#23) and mount middle
Grease Shields using same screws and
nuts
•see Fig 28.
Fig.28
29. MOUNTING THE TOOL HOOKS TO
BOTH LEFT AND RIGHT SIDE TABLES
Parts Required:
6 x Tool Hooks (#9)
1 x Left Side Table (#8)
1 x Right Side Table (#10)
6 x M6x10mm screws (#D)
Installation:
•Attach three Tool Hooks (#9) to the Left
Side Table (#8).
•Use: 3 x M6x10 screws (#D)
•See Fig.29
•Repeat the same step on Right
Side Table (#10).
Fig.29
30. MOUNTING THE LEFT SIDE TABLE
TO LEFT SIDE OF MAIN CHAMBER
Parts Required:
1 x Left Side Table (#8) 1
x Main Chamber
4 x M6x15mm screws (#A)
Installation:
•Attach 4x M6x15 screws onto left side of
Main Chamber and leave about 1/4” out.
Next hang the Left Side Table (#8) onto
those four screws and then push down to
seat on it, then tighten 4x M6x15 screws
(#A) securely.
•See Fig.30
Fig.30
20