User Manual
17
21. ATTACH THE ELECTRICAL
BACK COVER TO THE BACK SIDE OF
SMOKER CART ASSEMBLY
Parts Required:
1 x
Electric Wires Back Cover (#41)
1 x
Cart Assembly
2 x M6x15mm Screw (#
A
)
Installation:
•Unscrew two M6x15mm screws (factory
pre-assembled) from Bottom Table. Attach
Electrical Back Cover (#41) to the back
side of Smoker Cart Assembly
•Use: 2pcs M6x15mm screws (#A)
see Fig.21
Note: Assemble the screws on top side first
and then assemble the bottom screws later.
22. MOUNTING THE SMOKER TOP AIR
DAMPERS TO THE TOP OF SMOKER
CABINET ASSEMBLY
Parts Required:
2 x Smoker Top Air Dampers (#31)
1 x Smoker Cabinet Assembly (#32)
8 x M5x10mm Shoulder Bolts (#H)
Installation:
•Mount Smoker Top Air Dampers (#31) to
the Smoker Cabinet Assembly.
Use: 8pcs M5x10 Shoulder bolts (#IH)
see Fig.22
•Note: The Smoker Top Air Dampers have
identification label by left and right. Please
install to corresponding position. Make sure
the shoulder to insert onto the slots of air
dampers and the air dampers can be moved
smoothly.
23. ATTACHING THE SMOKER AIR
DAMPERS PULL HANDLE ASSEMBLY
TO THE SMOKER TOP AIR DAMPERS
Parts Required:
2 x Smoker Air Damper Pull Handle
Assembly (#18)
2 x Smoker Top Air Dampers (#31)
Installation:
•Attach two Smoker Air Damper Pull Handle
Assembly (#18) to two Smoker Top Air
Dampers (#31)
see Fig.23
Fig.23
Fig.22
Fig.21
#31.1 (L)
-------------
#31.2(R)
-------------