User Manual

12
7. ATTACHING THE SMOKER CABINET
ASSE MBLY TO THE LOWER CABINET
Parts Required:
1 x Smoker Cabinet Assembly (#32)
1 x Lower Cabinet Assembly (#46)
2 x M6x15mm Screw (#A)
2 x M6x35mm Screw (#E)
Installation:
• Attach Smoker Cabinet Assembly (#32)
to the Lower Cabinet Assembly(#46).
Use: 2 x M6x15mm (#A) and
2 x M6x35mm (#E)
see Fig.7
Fig.7
8. SLIDING THE WOOD CHIPS BOX
ASSEMBLY INTO THE LOWER
CABINET ASSEMBLY
Parts Required:
1 x Wood Chip Box Assembly (#51)
1 X Lower Cabinet Assembly (#46)
Installation:
• Slide Wood Chip Box Assembly (#51)
onto the Wood Chip Box support rails of
Lower Cabinet Assembly (#46)
see Fig.8
•
Note: When removing the Wood Chip Box
from the smoker, lift up on the handle and
pull out the Wood Chip Box.
9. MOUNTING THE DRAWER HANDLE
AND HANDLE STANDOFF TO THE
DRAWER
Parts Required:
2 x Drawer Handles (#49)
4 x Drawer Handle Standoffs (#48)
2 x Drawers (#47)
4 x M6x10mm Screws (#D)
Installation:
• Mount one Drawer Handle (#49) and
2 Drawer Handle Standoff (#48) to the
Drawer (#47)
Use: 2 x M6x10mm (#D)
see Fig.9
Repeat the same step for other drawer.
Fig.9
Fig.8
M6x35 bolt
M6x15 bolt
#48-1(L) -----
-----#48-2(R)