Use and Care Manual

Section One: ASSEMBLY INSTRUCTIONS
Section One: ASSEMBLY INSTRUCTIONSSection One: ASSEMBLY INSTRUCTIONS
Section One: ASSEMBLY INSTRUCTIONS
ASSEMBLING & MOUNTING THE LEGS & SHELF
ASSEMBLING & MOUNTING THE LEGS & SHELFASSEMBLING & MOUNTING THE LEGS & SHELF
ASSEMBLING & MOUNTING THE LEGS & SHELF
Tools Required:
1—7/16” Open End Box Wrench
Or
1– Adjustable Crescent Wrench
Installation Steps
2 Legs w/ axels
Step 1 Attach legs to barrel:
• To ease installation, gently lay the barrel on its end, not the
hopper end.
A piece of cardboard or blanket should be placed under
the grill to prevent scratching the finish.
• Using the 7/16” wrench, install the 2 legs WITHOUT the
wheel axles to the bottom of the barrel.
Part # 11a & 11b
Reminder: Leg with Bottle Opener faces out toward the
Front of the grill. Model 820D only.
Fasten all four 1/4” - #20 x 1/2” screws (A) through the
four pre-drilled screw holes both on the leg and
on the bottom of the barrel.
FASTEN ONLY, DO NOT TIGHTEN AT THIS POINT.
THIS ALLOWS FOR EASIER INSTALLATION OF
BOTTOM SHELF.
• Install the 2 legs WITH the wheel axles to the top of the
barrel. ( hopper end) Part # 8
Fasten all four 1/4” - #20 x 1/2” screws (A) through the four
pre-drilled screw holes both on the leg and
on the bottom of the barrel.
FASTEN ONLY, DO NOT TIGHTEN AT THIS POINT.
Page 6
Parts Supplied:
Hardware Suppled:
2 Legs
2 Metal Wheels
1 Bottom Shelf
7/16” Driver
Cordless Drill
11a
11b
8