Assembly Instructions

ManualsBrandsPit Boss ManualsGrills & Outdoor CookingPortable Ranch Hand Wood Pellet Grill

ENGLISH

• Secure the power cord bracket using the two screws pre-installed on the

rear side of the hopper, above the drop chute plate. Note illustration 4.

5.    

Parts Required:

1 x Lid Handle

(#11)

2 x Lid Handle Bezel

(#10)

Installation:

• Remove the pre-installed screws from the lid handle. From inside the

barrel lid, insert one screw to protrude to the outside. Add a bezel on

the screw, then hand-tighten the screw (from the inside) into the lid

handle. Repeat for the other side.

6.   

Parts Required:

1 x Thermometer Kit

(#3)

Installation:

• Remove the pre-installed nut from the thermometer. Insert the

thermometer into the hole provided on the top of the lid on the main

barrel, then secure by re-installing the nut from the inside. Rotate the

thermometer so the text is level and upright.

NOTE: If rotation is askew, this will result in incorrect readings.

7.    

Parts Required:

1 x Grease Bucket

(#13)

Installation:

• Place the grease bucket on the spout hook on the end of the main

barrel. Ensure it is level to avoid grease spills.

8.    

Parts Required:

1 x Side Shelf

(#16)

3 x Tool Hook

(#17)

1 x Side Shelf Handle

(#19)

1 x Bottle Opener

(#18)

Installation:

• Turn the side shelf upside down. On the edge of the side shelf with three

holes, install the tool hooks into each hole along the edge. Tool hooks

will secure to the self-clinching nut that is pre-mounted on the inside.

• Next, remove the pre-mounted screws from the side shelf handle. On the

short side with two holes, hand-tighten the screw (from the inside) into

the handle. Repeat for the other end of the handle. Note illustration 8.

8

8