Assembly Instructions

ENGLISH

• Last, remove the two pre-mounted screws for the bottle opener, and

re-install on the corner of the side shelf. Note illustration 8.

9.    

Installation:

• Remove the four pre-mounted screws from the side of the main barrel.

• From underneath, secure the side shelf to the side panel of the main

barrel using the four screws previously removed.

NOTE: Do not tighten any screws completely until all screws have

been installed. Once all screws are installed, then tighten securely.

IMPORTANT: Avoid using the side shelves to move or lift the grill.

The weight of the unit will cause the side shelf to break, which is not

covered by warranty.

10.    

Parts Required:

2 x Cooking Grids

(#2)

1 x Upper Cooking Rack

(#1)

1 x Flame Broiler Main Plate

(#8)

1 x Flame Broiler Slider

(#7)

Installation:

• Insert the flame broiler main plate into the main grill. Rest the flame

broiler main plate on the built-in ledge (on the inside right) of the

main grill that directs grease towards the grease bucket. Slide the

entire piece to the left side, and the two slots on the flame broiler

main plate will fit into the rounded ledge above the burn pot. It will

sit slightly at a downward angle. Note illustration 10.

NOTE: If the main plate is on the base of the barrel, it is installed incorrectly.

• Place the flame broiler slider on top of the flame broiler main plate,

covering the slotted openings. Ensure the raised tab is on the left, to easily

adjust for direct or indirect flame when cooking. Note illustration 10.

NOTE: When the flame broiler slider is open, and direct flame is used

while cooking, do not leave the grill unattended for any period of time.

• Place the cooking grids, side-by-side, on the grid ledge inside the main

grill. Place the upper cooking rack on the upper ledge inside the main

grill. The cooking rack will lock into place.

• The unit is now completely assembled.

NOTE: To maintain the searing and grilling performance of your

cooking grids, regular care and maintenance Is required.

10

10