Instructions / Assembly

Section Two: OPERATION
PIT BOSS CONTROL
PIT BOSS CONTROLPIT BOSS CONTROL
PIT BOSS CONTROL
Page 13
LCD SCREEN
Displays Grill Temperature, Smoke Settings (P Setting),
igniter and temperature status, and error
messages.
TEMPERATURE DIAL
Select the following: Smoke, High, or one of
8 temperatures.
“P” SET
Select one of 7 temperature fine tunings. Allows for
Larger temperature control to fit your cooking style
HIGH - HIGH TEMPERATURE MODE
Grill operates at the Highest heat level. This level can be
adjusted, fine tuned, using the “P” Set push button.
SMOKE - LOW TEMPERATURE MODE
Grill operates at the Lowest Temperature. This level
can be adjusted as well, using the “P” Set button.
888
Displays momentarily when the grill is connected to
AC power.
OVERVIEW
LCD SCREEN READOUTS
ACTUAL TEMPERATURE
Grill temperature is display in 5 degree (°F) increments.
FLASHING ACTUAL TEMPERATURE
When grill temperature is below 150°F.
FLASHING DOTS
Indicates when the Igniter is “ON”.
“P” SETTINGS P0 - P7
When the Temperature Dial is in either the Smoke or
High modes, “P 4” is the factory set default.
“ErH” FLASHING ERROR
Grill temperature has exceed 615°F. .
“ErP” FLASHING ERROR
Temperature Dial was not in the OFF position when
the grill was connected to AC power. Also indicated a
Power Outage occurred while the grill was operating.
OFF
Starts the “Cool Down Cycle”. Turning off the Feed System,
while letting the fan operate to efficiently cool down the grill
for 5 minutes.
“ErR” FLASHING ERROR
Grill Probe malfunction.