Assembly Instructions

ENGLISH
8
2.    
Parts Required:
1 x Bottom Panel
(#20)
2 x Wheel (#22)
4 x Screw (#A)
4 x Washer (#B)
4 x Locking Washer (#C)
2 x Nut (#D)
2 x Washer (#E)
Installation:
• From underneath, secure the bottom shelf to all each leg using a screw,
locking washer, and washer. Ensure the flat surface of the shelf is facing up.
Note illustration 2.
• After fitting the wheels into the axle, lock them with washer and nut. Note
illustration 2.
• Once the shelf is secure, carefully lift the grill into an upright position.
3.    
Parts Required:
1 x Lid Stopper
(#2)
Installation:
• Secure the lid stopper onto the top of the main barrel using the pre-
installed screw on the top of the main barrel.
4.    
Parts Required:
1 x Lid Handle
(#15)
2 x Lid Handle Bezel (#16)
Installation:
• Remove the pre-installed screws from the lid handle. From inside the barrel
lid, insert one screw to protrude to the outside. Add a bezel on the screw,
then hand-tighten the screw (from the inside) into the lid handle. Repeat
same installation for other end of lid handle.
4
16
16
15
22
2
22




3
2
2
20


