User Manual

PePWave Surf Series User Manual
Page 4
3 Product Description
PePWave Surf is a feature-rich Wi-Fi CPE with WPA, WPA2 and 802.1x supplicant support.
It is designed to act as a Wireless router and connects LAN users with a Wireless Broadband
Internet Service (such as Citywide Wi-Fi).
It associates to a service provider and authenticates using 802.1x (if needed) on start up.
Upon successful association and authentication, it will acquire an IP address from the
service provider using DHCP. A DHCP server is built-in on its LAN port. Network Address
Translation is performed for all outbound connections. Thus it supports multiple terminals
to access the Internet simultaneously.
3.1 Features
 10/100 Ethernet interface with auto-crossover detection
 Reset button for restoring settings to factory defaults
 Signal strength LED for showing the current signal strength (PePWave indoor serials
only)
 WPA/WPA2-Personal and WPA/WPA2-Enterprise support
 Network Address Translation (NAT) routing
 Built-in DHCP server
 Inbound port range forwarding
 Integrated Wi-Fi Access Point (Surf AP indoor and outdoor only)
Surf 200, AP 200, AP 400
Surf
AP 200/400
-
X, PolePoint 400
-
X
Surf
400
-
DX