PISMO LABS TECHNOLOGY peplink PEPWAVE Wireless Product : Users Manual : Page 6

When No

connections are

available

This field allows you to configure the default action when all the selected Connections are

not available.

Drop the Traffic - Traffic will be discarded.

Use Any Available Connections - Traffic will be routed to any available Connection, even

it is not selected in the list.

Fall-through to Next Rule - Traffic will continue to match the next Outbound Policy rule

just like this rule is inactive.

Terminate

Sessions on

Connection

Recovery

This setting specifies whether to terminate existing IP sessions on a less preferred WAN

connection in the event that a more preferred WAN connection is recovered. This setting is

applicable to the Priority algorithms. By default, this setting is disabled. In this case,

existing IP sessions will not be terminated or affected when any other WAN connection is

recovered. When this setting is enabled, existing IP sessions may be terminated when

another WAN connection is recovered, such that only the preferred healthy WAN

connection(s) is used at any point in time.

17.2.1 Algorithm: Weighted Balance

This setting specifies the ratio of WAN connection usage to be applied on the specified IP

protocol and port. This setting is applicable only when Algorithm is set to Weighted Balance .

The amount of matching traffic that is distributed to a WAN connection is proportional to the

weight of the WAN connection relative to the total weight. Use the sliders to change each WAN’s

weight.

For example, with the following weight settings:

● Ethernet WAN1: 10

● Ethernet WAN2: 10

● Wi-Fi WAN: 10

● Cellular 1: 10

● Cellular 2: 10

https://www.peplink.com

130