PISMO LABS TECHNOLOGY peplink PEPWAVE Wireless Product : Users Manual : Page 5

If Domain Name is chosen and a domain name, such as foobar.com , is entered, any

outgoing accesses to foobar.com and *.foobar.com will match this criterion. You may enter

a wildcard (.*) at the end of a domain name to match any host with a name having the

domain name in the middle. If you enter foobar.*, for example, www.foobar.com ,

www.foobar.co.jp , or foobar.co.uk will also match. Placing wildcards in any other position is

not supported.

Note: if a server has one Internet IP address and multiple server names, and if one of the

names is defined here, access to any one of the server names will also match this rule.

Protocol and Port

This setting specifies the IP protocol and port of traffic that matches this rule. Via a

drop-down menu, the following protocols can be specified:

● Any

● TCP

● UDP

● IP

● DSCP

Alternatively, the Protocol Selection Tool drop-down menu can be used to automatically

fill in the protocol and port number of common Internet services (e.g., HTTP, HTTPS, etc.)

After selecting an item from the Protocol Selection Tool drop-down menu, the protocol

and port number remains manually modifiable.

Algorithm

This setting specifies the behavior of the Pepwave router for the custom rule.

One of the following values can be selected (Note that some Pepwave routers provide only

some of these options):

● Weighted Balance

● Persistence

● Enforced

● Priority

● Overflow

● Least Used

● Lowest Latency

● Fastest Response Time

For a full explanation of each Algorithm, please see the following article:

https://forum.peplink.com/t/exactly-how-do-peplinks-load-balancing-algorithmns-work/8059

Load Distribution

Weight

This is to define the outbound traffic weight ratio for each WAN connection.

https://www.peplink.com

129