User's Manual

this option to Disconnect so that connection will be made only when needed.

PepVPN may use connected standby WAN for failover if link failure detected

on the higher priority WAN, you can set this option to Disconnect to avoid

data passing through.

Reply to ICMP

PING

If the checkbox is unticked , this option is disabled and the system will not

reply to any ICMP ping echo requests to the WAN IP addresses of this WAN

connection.

Default: ticked (Yes)

Upload Bandwidth

This field refers to the maximum upload speed.

This value is referenced when default weight is chosen for outbound traffic

and traffic prioritization. A correct value can result in effective traffic

prioritization and efficient use of upstream bandwidth.

Download

Bandwidth

This field refers to the maximum download speed.

Default weight control for outbound traffic will be adjusted according to this

value.

9.1.2 Static IP Connection

The static IP connection method is suitable if your ISP provides a static IP address to connect

directly.

https://www.peplink.com