User's Manual

http://www.pepwave.com
32
Copyright © 5/23/16 Pepwave
Web Portal Login
Web Portal
Select Enable to turn on your access point’s built-in web portal functionality.
Authentication
Method
Choose Open Access to allow users to connect without authentication or RADIUS to
require authentication. If RADIUS is selected, you’ll be given the opportunity to select a
RADIUS security method in the next field.
RADIUS Security
Select PAP, EAP-TTLS PAP, EAP-TTLS MSCHAPv2, or PEAPv0 EAP-MSCHAPv2.
Splash Page
If your web portal will use a splash page, choose HTTP or HTTPS and enter the splash
page’s URL.
Landing Page
If your web portal will use a landing page, check this box.
Landing Page
URL
If you have checked Landing Page, enter your landing page’s URL here.
Concurrent Login
Check this box to allow users to have more than one logged in session active at a time.
Access Quota
Enter a value in minutes to limit access time on a given login or enter 0 to allow
unlimited use time on a single login. Likewise, enter a value in MB for the total
bandwidth allowed or enter 0 to allow unlimited bandwidth on a single login.
Inactive Timeout
Enter a value in minutes to logout following the specified period of inactivity or enter 0 to
disable inactivity logouts.
Quota Reset Time
This menu determines how your usage quota resets. Setting it to Daily will reset it at a
specified time every day. Setting a number of minutes after quota reached establishes
a timer for each user that begins after the quota has been reached.