User's Manual

http://www.pepwave.com
24
Copyright © 5/23/16 Pepwave
SNMP Community Settings
Community Name
Enter a name for the SNMP community.
IP Address/IP
Mask
These settings specify a subnet from which access to the SNMP server is allowed.
Enter the subnet address here (e.g., 192.168.1.0) and select the appropriate subnet
mask.
Access Mode
Select Read Only or Read and Write as the SNMP community access mode.
Status
Use these controls to enable or disable SNMP community access.
To define a user name for SNMPv3, click Add SNMP User in the SNMPv3 User Name
table, which displays the following screen:
SNMPv3 User Settings
SNMPv3 User
Name
Enter a user name to be used in SNMPv3.
Authentication
Protocol
Select one of the following valid authentication protocols:
• NONE
• HMAC-MD5
• HMAC-SHA
When HMAC-MD5 or HMAC-SHA is selected, an entry field will appear for the
password.
Authentication
Password
Enter a password to use with the selected authentication protocol.
Confirm
Authentication
Password
Re-enter the authentication password.
Privacy Protocol
Select None or CBC-DES as the SNMPv3 privacy protocol. When CBC-DES is
selected, an entry field will appear for the password.
Access Mode
Select Read Only or Read and Write as the SNMPv3 access mode.