User's Manual

http://www.pepwave.com
23
Copyright © 5/23/16 Pepwave
settings to control simple network management protocol access.
SNMP Settings
SNMP Device
Name
This field shows the AP name defined at System>Admin Security.
SNMP Port
This option specifies the port which SNMP will use. The default port is 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2c
This option allows you to enable SNMP version 2c.
SNMPv3
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2c, click the Add SNMP Community