User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com 8 Copyri

ht @ 2015 Pepwave

y Bandwidth bonding and failover among selected WAN connections

y IPsec VPN for network-to-network connections (works with Cisco and Juniper

only)

y Ability to route Internet traffic to a remote VPN peer

y Optional pre-shared key setting

y SpeedFusion

throughput, ping, and traceroute tests

y PPTP server

y PPTP and IPsec passthrough

3.1.4 Firewall

y Outbound (LAN to WAN) firewall rules

y Inbound (WAN to LAN) firewall rules per WAN connection

y Intrusion detection and prevention

y Specification of NAT mappings

y Outbound firewall rules can be defined by destination domain name

3.1.5 Captive Portal

y Splash screen of open networks, login page for secure networks

y Customizable built-in captive portal

y Supports linking to outside page for captive portal

3.1.6 Outbound Policy

y Link load distribution per TCP/UDP service

y Persistent routing for specified source and/or destination IP addresses per

TCP/UDP service

y Traffic prioritization and DSL optimization

y Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms

3.1.7 AP Controller

y Configure and manage Pepwave AP devices

y Review the status of connected APs

3.1.8 QoS

y Quality of service for different applications and custom protocols

y User group classification for different service levels

y Bandwidth usage control and monitoring on group- and user-level