User's Manual
Pepwave MAX and Surf User Manual
http://www.pepwave.com 74 Copyri
g
ht @ 2015 Pepwave
Wi-Fi WAN settings can be configured at Advanced>Wi-Fi Settings (or
Advanced>Wi-Fi WAN or some models).
Wi-Fi WAN Settings
Channel Width
Available options are 20/40 MHz and 20 MHz. Default is 20/40 MHz, which allows both
widths to be used simultaneously.
Bit Rate
7KLVRSWLRQDOORZV\RXWRVHOHFWDVSHFLILFELWUDWHIRUGDWDWUDQVIHURYHUWKHGHYLFH¶V:L-
Fi network. By default, Auto is selected.
Output Power
This option is for specifying the transmission output power for the Wi-Fi AP. There are 4
relative power levels available ± Max, High, Mid, and Low. The actual output power
will be bound by the regulatory limits of the selected country. Note that selecting the
Boost RSWLRQPD\FDXVHWKH0$;¶VUDGLRRXWSXWWRH[FHHGORFDOUHJXODWRU\OLPLWV