User's Manual
Pepwave MAX and Surf User Manual
http://www.pepwave.com 33 Copyri
g
ht @ 2015 Pepwave
1. Start a web browser on a computer that is connected with the Pepwave router
through the LAN.
2. To connect to the URXWHU¶Vweb admin interface, enter the following LAN IP address
in the address field of the web browser:
http://192.168.50.1
(This is the default LAN IP address for Pepwave routers.)
3. Enter the following to access the web
admin interface.
Username: admin
Password: admin
(This is the default username and
password for Pepwave routers. The
admin and read-only user passwords
can be changed at System>Admin
Security.)
4. After successful login, the Dashboard will be displayed.
The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can
change WAN connection priority and switch on/off the Wi-Fi AP. For further information
on setting up these connections, please refer to Sections 8 and 9.
Device Information displays details about the device, including model name, firmware
version, and uptime. For further information, please refer to Section 22.