User's Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com
178
Copyright @ 2016 Pepwave
Appendix A. Restoration of Factory Defaults
To restore the factory default settings on a Pepwave router, follow the steps below:
1. Locate the reset button on the front or back panel of the Pepwave router.
2. With a paper clip, press the reset button and hold it for at least 10 seconds, until
the unit reboots itself.
After the Pepwave router finishes rebooting, the factory default settings will be restored.
Important Note
All previous configurations and bandwidth usage data will be lost after restoring factory default settings. Regular
backup of configuration settings is strongly recommended.
Appendix B. Case Studies
MPLS Alternative
Our SpeedFusion enabled routers can be used to bond multiple low-cost/commodity Internet
connections to replace an expensive managed business Internet connection, private leased line,
MPLS, and frame relay without sacrificing reliability and availability.
Belows are typical deployment for using our Balance routers to replace expensive MPLS
connection with commodity connections, such as ADSL, 3G, and 4G LTE links.
Our MAX HD4 routers are capable of connecting to four different wireless networks
simultaneously.