User's Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com
168
Copyright @ 2016 Pepwave
22.5 UPnP / NAT-PMP
The table that shows the forwarded ports under UPnP and NAT-PMP protocols is
located at Status>UPnP/NAT-PMP. This section appears only if you have enabled
UPnP / NAT-PMP as mentioned in Section 16.1.1.
Click to delete a single UPnP / NAT-PMP record in its corresponding row. To
delete all records, click Delete All on the right-hand side below the table.
Important Note
UPnP / NAT-PMP records will be deleted immediately after clicking the button or Delete All, without the
need to click Save or Confirm.
22.6 SpeedFusion Status
Current SpeedFusion
TM
status information is located at Status>SpeedFusion
TM
.
Details about SpeedFusion
TM
connection peers appears as below:
Click on the corresponding peer name to explore the WAN connection(s) status and
subnet information of each VPN peer.