User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

To enable Layer 2 Bridging between PepVPN profiles, navigate to

Network>LAN>Basic Settings>*LAN Profile Name* and refer to instructions in

section 8.1

8.41

WAN Connection Priority

WAN

Connection

Priority

If your device supports it, you can specify the priority of WAN connections to be used for

making VPN connections. WAN connections set to OFF will never be used. Only available

WAN connections with the highest priority will be used.

To enable asymmetric connections, connection mapping to remote WANs, cut-off latency,

and packet loss suspension time, click the button.

Send All Traffic To

This feature allows you to redirect all traffic to a specified PepVPN connection. Click the button to select your

connection and the following menu will appear:

You could also specify a DNS server to resolve incoming DNS requests.

Outbound Policy/PepVPN Outbound Custom Rules

Some models allow you to set outbound policy and custom outbound rules from Advanced>PepVPN. See Section

14 for more information on outbound policy settings.