User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

Cellular Settings

Network

Selection

By default, the MAX router will automatically choose a network to connect to. If you wish to

use only certain networks, click the button beside the menu item.

3G/2G

This drop-down menu allows restricting cellular to particular band. Click the button to

enable the selection of specific bands.

Authentication

Choose from PAP Only or CHAP Only to use those authentication methods exclusively.

Select Auto to automatically choose an authentication method.

Data Roaming

This checkbox enables data roaming on this particular SIM card. Please check your service

provider’s data roaming policy before proceeding.

Operator

Settings

This setting applies to 3G/EDGE/GPRS modems only. It does not apply to EVDO/EVDO Rev.

A modems. This allows you to configure the APN settings of your connection. If Auto is

selected, the mobile operator should be detected automatically. The connected device will be

configured and connection will be made automatically. If there is any difficulty in making

connection, you may select Custom to enter your carrier’s APN, Login, Password, and Dial

Number settings manually. The correct values can be obtained from your carrier. The default