User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 90 Copyright @ 2011 Pepwave
17.10 Traceroute Test
The Traceroute Test tool in Pepwave MAX traces the routing path to the destination through a particular
Ethernet interface or a Site-to-Site VPN connection.
The Traceroute Test utility is located at System > Tools > Traceroute, illustrated as follows:
Tip
A System Administrator can use the Traceroute utility to analyze the connection path of a LAN/WAN
connection.
17.11 VPN Test
The VPN Test tool can help to test the throughput between different VPN peers.
You can define the Test Type, Direction, and Duration of the test, and press Go! to perform the
throughput test.
The VPN Test utility is located at System > Tools > VPN Test, illustrated as follows: