User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 9 Copyright @ 2011 Pepwave
LAN and Ethernet WAN Ports
Green LED
ON 100 Mbps
OFF 10 Mbps
Yellow LED
Solid Port is connected without traffic
Blinking Data is transferring
OFF Port is not connected
Port Type
Auto MDI/MDI-X ports
4.1.3 Rear Panel Appearance
Power Connector
Terminal Block