User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 89 Copyright @ 2011 Pepwave
17.9 Ping Test
The Ping Test tool in Pepwave MAX performs Pings through a specified Ethernet interface or a Site-to-
Site VPN connection. You can specify the number of pings in the field Number of times to a maximum of
10 times, and Packet Size can be specified in the field Packet Size to a maximum of 1472 bytes.
The Ping utility is located at System > Tools > Ping, illustrated as follows:
Tip
A System Administrator can use the Ping utility to manually check the connectivity of a particular
LAN/WAN connection.