User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 87 Copyright @ 2011 Pepwave
17.7 Configuration
Backing up the Pepwave MAX settings immediately after successful completion of the initial setup is
strongly recommended.
The functionality to download and upload Pepwave MAX settings is found at System > Configuration:
17.7.1 Restore Configuration to Factory Settings
The Restore Factory Settings button is to reset the configuration to the factory default settings. You
have to click the Apply Changes button to make the settings effective.
17.7.2 Downloading Active Configurations
The Download button is to backup the current active settings. Click Download and save the
configuration file.
17.7.3 Uploading Configurations
To restore or change settings based on a configuration file, click Browse… to locate the configuration file
on the local computer, and then click Upload.
The new settings can then be applied by clicking the Apply Changes button on the page header, or
discard at the Main page of Web Administration Interface.