User Manual

Table Of Contents
http://www.pepwave.com 82 Copyright @ 2011 Pepwave
17.4 Email Notification
The Email Notification functionality of Pepwave MAX provides a System Administrator with up-to-date
information on network status.
The settings for configuring Email Notification are found at System > Email Notification:
Email Notification Settings
Email Notification
This option is for enabling Email Notification.
If the box Enable is checked, Pepwave MAX sends email messages to a System
Administrator when the WAN status changes, or when new firmware is available.
If the box Enable is not checked, Email Notification is disabled and Pepwave
MAX will not send email messages.
SMTP Server
This field is for specifying the SMTP server to be used for sending email. If the
server requires authentication, check the box Require authentication.
SSL Encryption
Check the box to enable SMTPS. When the box is checked, the next field SMTP
Port will be changed to 465 automatically.
SMTP Port
This field is for specifying the SMTP Port number.
By default, this is set to 25; when the SSL Encryption box is checked, the
default port number will be set to 465.
You may customize the port number by editing this field. Click the button Default
to restore to default.
SMTP User Name
/ Password
This setting specifies the SMTP username and password while sending email.
These options are shown only if Require authentication check box is checked in
SMTP Server setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.