User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 72 Copyright @ 2011 Pepwave
16 Miscellaneous Settings
The miscellaneous settings include configuration for PPTP Server, Service Forwarding, and Service
Passthrough.
16.1 PPTP Server
Pepwave MAX has a built-in PPTP Server, which enables remote computers to conveniently and securely
access the local network.
PPTP server setting is located at Advanced > Misc. Settings > PPTP Server.
Simply check the box to enable the PPTP server function. All connected PPTP sessions are displayed on
the Client List at Status > Client List. Please refer to section 19.3 for details.
PPTP Server Setting
Listen On
This setting is for specifying the WAN connection(s) and IP address(es) where
the PPTP server should listen on.
User Accounts
This setting allows you to define the PPTP User Accounts. Click Add to input
username and password to create an account. After adding the user accounts,
you can click on a username to edit the account password. Click the button
to delete the account in its corresponding row.