User Manual

http://www.pepwave.com 6 Copyright @ 2011 Pepwave
3 Product Features
Pepwave MAX enables all LAN users to share broadband Internet connections, and provide advanced
features to enhance Internet access. The following is the list of supported features on Pepwave MAX
Mobile Router:
3.1 Supported Network Features
3.1.1 WAN
 Ethernet WAN Connection in Full/Half Duplex
 USB WAN connections
 PC Card WAN connection
 Express Card WAN connection
 Wi-Fi WAN connection
 Network Address Translation (NAT) / Port Address Translation (PAT)
 Inbound and Outbound NAT mapping
 IPsec NAT-T and PPTP packet passthrough
 MAC address clone and passthrough
 Customizable MTU and MSS values
 WAN connection health check
 Dynamic DNS (Supported service providers: changeip.com, dyndns.org, no-ip.org and tzo.com)
3.1.2 LAN
 Wi-Fi AP
 Ethernet LAN ports
 DHCP server on LAN
 Static routing rules
3.1.3 VPN
 Secure Site-to-Site VPN
 VPN load balancing and failover among selected WAN connections
 Site-to-Site VPN bandwidth bonding
 Ability to route Internet traffic to a remote VPN peer
 Optional pre-shared key setting
 Site-to-Site VPN Throughput, Ping and Traceroute Test
 PPTP server
 PPTP and IPsec passthrough
3.1.4 Firewall
 Outbound (LAN to WAN) firewall rules
 Inbound (WAN to LAN) firewall rules per WAN connection
 Intrusion detection and prevention
 Specification of NAT mappings