User Manual

Table Of Contents
http://www.pepwave.com 59 Copyright @ 2011 Pepwave
IP Protocol
The IP Protocol setting, along with the Port setting, specifies the protocol of the
service as TCP, UDP, ICMP or IP.
Traffic that is received by Pepwave MAX via the specified protocol at the
specified port(s) is forwarded to the LAN hosts specified by the Servers setting.
(Please see below for details on the Port and Servers settings.)
Alternatively, the Protocol Selection Tool drop-down menu can be used to
automatically fill in the Protocol and a single Port number of common Internet
services (e.g. HTTP, HTTPS, etc.).
After selecting an item from the Protocol Selection Tool drop-down menu, the
Protocol and Port number remains manually modifiable.
Port
The Port setting specifies the port(s) that correspond to the service, and can be
configured to behave in one of the following manners:
Any Port, Single Port, Port Range and Port Map
Any Port: All traffic that is received by Pepwave MAX via the specified protocol is
forwarded to the servers specified by the Servers setting.
For example, with IP Protocol set to TCP, and Port set to Any Port, all TCP
traffic is forwarded to the configured servers.
Single Port: Traffic that is received by Pepwave MAX via the specified protocol
at the specified port is forwarded via the same port to the servers specified by the
Servers setting.
For example, with IP Protocol set to TCP, and Port set to Single Port and
Service Port 80, TCP traffic received on Port 80 is forwarded to the configured
servers via Port 80.
Port Range: Traffic that is received by Pepwave MAX via the specified protocol
at the specified port range is forwarded via the same respective ports to the LAN
hosts specified by the Servers setting.
For example, with IP Protocol set to TCP, and Port set to Single Port and
Service Port 80-88, TCP traffic received on ports 80 through 88 is forwarded to
the configured servers via the respective ports.
Port Mapping: Traffic that is received by Pepwave MAX via the specified
protocol at the specified port is forwarded via a different port to the servers
specified by the Servers setting.
For example, with IP Protocol set to TCP, and Port set to Port Map, Service
Port 80, and Map to Port 88, TCP traffic on Port 80 is forwarded to the
configured servers via Port 88.
(Please see below for details on the Servers setting.)