User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 46 Copyright @ 2011 Pepwave
Important Note
• When outbound Internet traffic is routed to remote Site-to-Site VPN peer, the remote peer will
route the traffic to its first available WAN connection only.
• Pepwave proprietary Site-to-Site VPN used TCP and UDP port 32015 for establishing VPN
connections. If you have a firewall in front of the devices, you will need to add firewall rules for
these port and protocols which will allow inbound and outbound traffic pass-through the
firewall.
Tip
Want to know more about VPN Sub-Second Session Failover? Visit our YouTube Channel for a video tutorial!
http://www.youtube.com/PeplinkChannel#p/u/0/FXPAJ37b4pQ