User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 42 Copyright @ 2011 Pepwave
9.1 STP (Spanning Tree Protocol)
STP Settings
Bridge Priority
This parameter is set to give the likeliness for root switch election.
By default, it is set to 32768.
Ethernet Path Cost
This parameter specifies the preference to provide the best path from the
switch to the root switch.
By default, it is set to 100.