User Manual

http://www.pepwave.com 40 Copyright @ 2011 Pepwave
9 Wi-Fi Settings
Wi-Fi settings can be configured at Advanced > Wi-Fi Settings:
Wi-Fi AP Radio Settings
Protocol
This option allows you to specify whether 802.11b and/or 802.11g client
association requests will be accepted. Available options are 802.11b/g,
802.11b Only, and 802.11g Only.
By default, 802.11b/g is selected.
Operating Country
This option set the country whose regulations the Pepwave MAX follows.
Channel
This option allows you to select which 802.11 RF channel will be utilized.
Channel 1 (2.412 GHz) is selected by default.
Output Power
This option is for specifying the transmission output power for the Wi-Fi AP.
By default, 23 dBm (200 mW) or 20 dBm (100 mW) (depending on which
operating country you have chosen in the previous section) is selected.
Note to US model owner: To comply with US FCC regulation, the country selection function has
been completely removed from all US models. The above function is for non-US models only.
Wi-Fi WAN Radio Settings
Output Power
This option is for specifying the transmission output power for the Wi-Fi WAN.
By default, 23 dBm (200 mW) or 20 dBm (100 mW) (depending on which
operating country you have chosen in the previous section) is selected.