User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 24 Copyright @ 2011 Pepwave
8 Configuration of WAN Interface(s)
The WAN Interface settings are located at: Network > WAN
To reorder different WANs’ priority, just drag on the appropriate WAN by holding the left mouse button,
move it to the desired priority (the first one would be the highest priority, the second one would be lower
priority, and so on) and drop it by releasing the mouse button.
To disable a particular WAN connection, just drag on the appropriate WAN by holding the left mouse
button, move it the DISABLED row and drop it by releasing the mouse button.
You can also do the above priority setting on the Dashboard, please refer to Section 7 for information.
Click the Details button in the corresponding row of connection to modify the connection setting.
Important Note
Connection Details will be changed and become effective right AFTER clicking the Save and Apply
button.