User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 21 Copyright @ 2011 Pepwave
identified by their MAC addresses.
The fixed IP address assignment is displayed as a cross-reference list between
the computers’ Name, MAC addresses and fixed IP addresses.
The field Name (an optional field) is for you to define a name to represent the
device. MAC addresses should be in the format of 00:AA:BB:CC:DD:EE
Press to create a new record. Press to remove a record.
Reserved clients information can be imported from the Client List, located at Status >
Client List. For more details, please refer to section 19.3.
Static Route Settings
Static Route
This table is for defining static routing rules for the LAN segment.
A static route consists of the network address, subnet mask, and gateway
address. The address and subnet mask values are in the format of w.x.y.z
The local LAN subnet and subnets behind the LAN will be advertised to the
VPN. Remote routes sent over the VPN will also be accepted. Any VPN member
will be able to route to the local subnets.
Press to create a new route. Press to remove a route.
WINS Server Settings
Enable
Check the box to enable the WINS Server. A list of WINS clients will be displayed
at Status > WINS Clients.
DNS Proxy Settings
Enable
A check box to enable to DNS Proxy feature.
DNS Caching
This field is to enable DNS caching on the built-in DNS proxy server. When the
option is enabled, queried DNS replies will be cached until the records’ TTL has
been reached. This feature can help improve the DNS lookup time. However, it
cannot return the most updated result for those frequently updated DNS records.
By default, it is disabled.
Use Google DNS
Server as
Backup
Check the box to enable this option, and the Pepwave MAX will automatically use
Google DNS Server as a backup DNS server. The DNS proxy server will forward
DNS requests to Google's Public DNS Servers in the case if all WAN connections'
DNS servers become unavailable.
By default, it is disabled.
Local DNS
Records
This table is for defining custom local DNS records.
A static local DNS record consists of a Host Name and an IP Address. When
looking up the Host Name from the LAN to LAN IP of Pepwave MAX, the
corresponding IP Address will be returned.
Press to create a new record. Press to remove a record.