User Manual
Table Of Contents
- Table of Contents
- Introduction and Scope
- Glossary
- Product Features
- Pepwave MAX Mobile Router Overview
- Installation
- Connecting to Web Admin Interface
- Configuration of LAN Interface(s)
- Configuration of WAN Interface(s)
- Wi-Fi Settings
- Site-to-Site VPN
- Management of Outbound Traffic to WAN
- Port Forwarding
- NAT Mappings
- QoS
- Firewall
- Miscellaneous Settings
- System Settings
- Status
- Restoration of Factory Defaults
- Declaration
http://www.pepwave.com 17 Copyright @ 2011 Pepwave
6 Connecting to Web Admin Interface
1. Start a web browser on a computer that is connected with Pepwave MAX through LAN.
2. To connect to Web Admin Interface of Pepwave MAX, enter the following LAN IP address in the
address field of the web browser:
http://192.168.50.1
(This is the default LAN IP address of Pepwave MAX.)
3. Enter the following to access the Web Admin
Interface.
User Name: admin
Password: admin
(This is the default Username and Password
of Pepwave MAX. The Admin and Read-only
User Password can be changed at System >
Admin Security of the Web Admin Interface.)
4. After successful login, the Dashboard of Web Admin Interface will be displayed. It looks similar
to the following: