User's Manual

USER MANUAL

Peplink Balance Series

8 Basic Configuration

8.1 Connecting to the Web Admin Interface

1. Start a Web browser on a computer that is connected with the Peplink Balance through the LAN.

2. To connect to the W eb Adminof thePeplink Balance, enter the following LAN IP address in the

address field of the web browser:

http://192.168.1.1

(This is the default LAN IP address of the Peplink Balance.)

3. Enter the following to access the W eb

Admin Interface.

User Name: admin

Password: admin

(This is the default Admin User login of

the Peplink Balance. The Admin and

Read-only User Password can be

changed atSystem > Admin Security.)

4. After successful login, the Dashboard of the Web Admin Interfacewill be displayed. It looks

similar to the following:

Important Note

The Save button causes the changes to be saved. Configuration changes (e.g., WAN, LAN, admin settings, etc.)

take effect after clicking the Apply Changes button on each page’s top right corner.