User's Manual

USER MANUAL

Peplink Balance Series

A list of definedSpeedFusion

connection profiles and aLink Failure Detection Time option will be

shown.Click the New Profile button to create a new VPN connection profile for making a VPN connection

to a remote Peplink Balance via the available WAN connections.Each profile is for making a VPN

connection with one remote Peplink Balance.

PepVPN Profile Settings

Name

This field is for specifying a name to represent this profile. The name can be any

combination of alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes (-), and/or

non-leading/trailing spaces ( ).

Active

When this box is

checked, this VPN connection profile

will be enabled. Otherwise, it will be

disabled.

SpeedFusion

This field indicates weather this device supports SpeedFusion or not.

Encryption

By default, VPN traffic is encrypted with

256-bit AES. If Off

is selected on both sides of a

VPN connection, no encryption will be applied.

Remote ID

To allow the Peplink Balance to establisha VPN connection with a specific remote peer

using a unique identifying number, enter the peer’sID or serial number here.

Authentication

Select from By Remote ID Only, Preshared Key, or X.509 to specify the method the

Peplink Balance will use to authenticate peers. When selecting By Remote ID Only, be

sure to enter a unique peer ID number in the Remote ID field.