User's Manual

USER MANUAL

Peplink Balance Series

Operator

Settings

This setting applies to 3G/LTE/EDGE/GPRS modems only. It does not apply to EVDO/EVDO

Rev. A modems.

Operator Settingsallows you to configure the APN settings of your connection. If Auto is

selected, the Peplink Balance will automatically detect the APN, configure the modem, and make

a connection. You may change the APN settings by selecting Custom Mobile Operator

Settings.The default and recommended Operator Settingsvalue is Auto.The correct values can

be obtained from your mobile Internet service provider.

SIM PIN

(Optional)

This is an optional field which is only needed when there is SIM lock for your SIM card service.

DNS Servers

Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the DNS

servers to be used when a DNS lookup is routed through this connection. You can input the ISP-

provided DNS server addresses into the DNS server 1 and DNS server 2 fields. If no address is

entered here, this link will not be used for DNS lookups.

Please refer to sections, , , and for details about WAN Health Check, Bandwidth Allowance Monitor,

Additional Public IP Settings, and Dynamic DNS Settings.