User's Manual

USER MANUAL

Peplink Balance Series

11.1.2 Static IP Connection

The static IP connection method is suitable if yourISP provides a static IP address to connect directly.

Static IP Settings

IP Address /

Subnet Mask /

Default Gateway

These settings specify the information required in order to communicate on the Internet

via a fixed Internet IP address.

The information is typically determined by and can be obtained from yourISP.

DNS Servers

Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the

DNS (Domain Name System) servers to be used when a DNS lookup is routed through

this connection.

You can input the ISP-provided DNS server addresses into the DNSserver 1 and

DNSserver 2 fields. If no address is entered here, this link will not be used for DNS

lookups.

Please refer to Section , , , and for details about WAN Health Check, Bandwidth Allowance Monitor,

Additional Public IP Settings, and Dynamic DNS Settings respectively.