User's Manual

USER MANUAL

Peplink Balance Series

11 Configuring the WAN Interface(s)

WAN interface settings are located at: Network> Interfaces > WAN

By clicking a connection name,connection settings of that WAN can be modified.The connection method

and details can be obtained from yourISP.

Connection Settings

WAN Connection

Name

This field is for defining a name to represent this WAN connection.

Enable

This field is for choosing whether to enable this WAN connection.

Connection Method

This option allows you to select the connection method for this WAN connection. Available

options are:

1. DHCP

2. Static IP

3. PPPoE

4. Mobile Internet Connection

See sections , , , and for configuration details pertaining to each connection method.

Routing Mode

This field shows that NAT (Network Address Translation) will be applied to the traffic

routing over this WAN connection. IP Forwarding is also available when you click the link

in the help text. For further details, please refer to , Routing under DHCP, Static IP, and

PPPoEį

Connection Type

This setting specifies the utilization of the WAN connection.