User's Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com -52 / 227 - Copyright © Peplink
Health Check Settings
Heath
Check
Method
This setting allows you to specify the health check method for the Cellular connection.
The as available options are Disabled, Ping, DNS Lookup, HTTP, and SmartCheck
The default method is DNS Lookup.See Section for configuration details.
Timeout
If a health check test cannot be completed within the specified amount of time, the test
will be treated as failed.
Health Check
Interval
This is the time interval between each health check test.
Health Check Retries
This is the number of consecutive check failures before treating a connection as down.
Recovery Retries
This is the number of responses required after a
health check failure before treating a
connection as up again.
Dynamic DNS Settings
Dynamic DNS Service
Provider
This setting specifies the dynamic DNS service provider to be used for the WAN based on
supported dynamic DNS service providers:
· changeip.com
· dyndns.org
· no-ip.org
· tzo.com
· DNS-O-Matic
Select Disabled to disable this feature.See Section for configuration details.
Bandwidth Allowance Settings
Bandwidth Allowance
Monitor
This option allows you to enable bandwidth usage monitoring on this WAN connection
for each billing cycle. When this is not enabled, bandwidth usage of each month is still
being tracked but no action will be taken.