User's Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com -67 / 227 - Copyright © Peplink
address will be used. The Balance will listen for this IP address when LAN hosts access
services provided by the Balance (Web Admin a
ccess from the WAN, DNS proxy, etc.).
Shared IP
Address
A
Access to this IP address will be passed through to the LAN port if this device is not serving
the service being accessed. The shared IP Address will be used in connecting to hosts on
the WAN (e.g. email notification, remote syslog, etc.) The device will also listen on the IP
address when hosts on the WAN access services served on this device (e.g. web admin
accesses from WAN, DNS server, etc.)
WAN Default
Gateway
Enter the WAN router's IP address in this field. If there are more hosts
in addition tothe
router on the WAN segment, check the
I have other host(s) on WAN segment box
and
enter the IP address of the hosts that need
to access LAN devices or be accessed by
others.
WAN DNS Servers
Enter the selected WAN's corresponding DNS server IP a
ddresses.
A
- Advanced feature, please click the button on the top right hand corner to activate.
Note: Drop-in Mode and VLAN functionality are mutually exclusive.
DHCP Server Settings
DHCP Server
When this setting is enabled, the Peplink Balance’s DHCP server automatically assigns an
IP address to each computer that is connected via LAN and is configured to obtain an IP
address via DHCP.
The Peplink Balance’s DHCP server can prevent IP address collision
s
on the LAN.
IP Range &
Subnet Mask
These settings allocate a range of IP address that will be assigned to LAN computers by the
Peplink Balance’s DHCP server.
Lease Time
This setting specifies the length of time throughout which an IP address of a DHCP client
remains valid. Upon expiration of Lease Time, the assigned IP address will no longer be
valid and the IP address assignment must be renewed.
DNS Servers
This option allows you to input the DNS server addresses to be offered to DHCP clients. If
Assign DNS server automatically is selected, the Peplink Balance’s built-in DNS server
address (i.e., LAN IP address) will be offered.
WINS Server
This option allows you to specify the Windows Internet Name Service (WINS) server. You
may choose to use the built
-in WINS server or external WINS servers.
When this unit is connected using SpeedFusion
TM
, other VPN peers can share this unit's