User's Manual
USER MANUAL
Peplink Balance Series
http://www.peplink.com -65 / 227 - Copyright © Peplink
9 Configuring theLAN Interface
LAN Interface settings are located atNetwork> Interfaces > LAN.
IPSettings
IP Address &
Subnet Mask
Enter Peplink Balance’s IP address and subnet mask values to be used on the LAN.
Speed
This setting specifies the speed of the LAN Ethernet port.
By default, Auto is selected and the appropriate data speed is automatically detected by
Peplink Balance.
In the event of negotiation issues, the port speed can be manually specified to circumvent
the issues. You can also choose whether or not to advertise the speed to the peer by
selecting the Advertise Speed checkbox.
To enable VLAN configuration, press the button under IP Settings. After clicking the link, the following
screen will appear:
Click theNew LANbutton to reach the following screen:
VLAN-enabled IP Settings
Name
This field specified the name of this particular VLAN
IP Address
Enter Peplink Balance’s IP address and subnet mask values to be used on the VLAN.
VLAN ID
Please enter a
numerical value to identify this VLAN.
Captive Portal
This options switches on captive portal for users connected to this VLAN. Users on open
networks will receive a splash screen, while users on closed networks will receive a login
screen.
DHCP Server
Check the Enable box to enable the built-in DHCP server which serves DHCP requests on