User's Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com -187 / 227 - Copyright © 2014 Peplink
To add a community for either SNMPv1 or SNMPv2, click theAdd SNMP Communitybutton in the
Community Nametable, upon which the following screen is displayed:
SNMP Community Settings
Community Name
This setting specifies the SNMP Community Name.
Allowed Source
Subnet Address
This setting specifies a subnet from which access to the SNMP server is allowed.
Enter subnet address here (e.g. 192.168.1.0) and select the appropriate subnet mask.
To define a user name for SNMPv3, click Add SNMP Userin the SNMPv3 User Nametable, upon which
the following screen is displayed:
SNMPv3 User Settings
User Name
This setting specifies a user name to be used in SNMPv3.
Authentication
Protocol
This setting specifies via a drop-down menu the one of the following valid
authentication protocols:
 NONE
 MD5
 SHA
When MD5 or SHA is selected, an entry field will appear for the password.
Privacy Protocol
This setting specifies via a drop-down menu the one of the following valid privacy
protocols:
 NONE
 DES
When MD5 or SHA is selected, an entry field will appear for the password.